Replacement Locks For Patio Doors at Lowe's
Replacing the patio door lock is a straightforward and effective method to improve the security of your home. However the correct installation and regular maintenance is crucial.
To successfully replace the patio door lock, it is vital to know what the type of your existing one is. You can determine the type by observing the size of the screw hole and the type of face plate at the end.
Identifying Your Lock's Existing Lock
If you are considering purchasing a new hardware for your lock it is essential to know the distinctions between different kinds of locks. This will enable you to locate a replacement perfect for your home, and also ensure its safety and security.
The most popular type of lock is the cylinder lock sometimes referred to pin and tumbler locks. This lock type makes use of the top pins, bottom pins, and springs to keep the key hole and plug secured. Cylinder locks come in many different sizes. It is crucial to know the length and width of the cylinder you currently have before you purchase the new one.
To determine the width to determine the width, loosen the screws that hold the cylinder in position and carefully pull it out. Then, you can measure the distance in millimeters between the outside edge and the inside of the cylinder. Then, you can compare this number with the measurements of the new lock you're planning to purchase. This will ensure that the new lock will fit into the existing door lockhole.
Another way to determine the proper size of your existing lock is to test it with keys. If the key slides into the cylinder easily and is in the correct size, it's the width of the rekeying kit you need. If the key is unable to slide into the cylinder, then the cylinder may have a different keyway, and therefore, it is not rekeyable in a way that it will accept the same brand of key.
It is essential to review the instruction manuals provided by the manufacturer with a kit for rekeying. Each type of lock comes with its own set of unique installation requirements. It is essential to test the new lock thoroughly after installation to ensure it operates effectively and provides the highest level of security. It is also important to be aware of any additional features of the new lock, since they could affect the ease of use.
Take a measurement of the Width
A broken patio door lock can result in serious security issues. It is crucial to examine your locks on a regular basis and replace them if necessary. This will ensure that they're functioning properly and are safe. It can also help to prevent problems like a damaged latch or keyway. Lowe's has new locks that can provide your home with the security you require regardless of whether your locks are damaged or worn.
It is essential to measure your patio door before purchasing the new lock. This will give you an idea of what size to purchase and eliminate the risk of buying a lock that doesn't fit. To do this, you'll have to determine two dimensions that are the length of the backset and the depth of the case. The former refers to the distance between the edge of the lock's face to the centre of the round hole through which the handle spindle passes through, while the latter refers to the depth of the lock body that can be viewed from the outside of the door.
It's also important to consider how you use your doors before deciding on the type of lock you'll need. If your sliding doors open horizontally you will need top and bottom tab locks that engages with the strikeplate and prevents it from being lifted or forcefully opened. If your patio doors open vertically, you'll have to select mortise locks with an attached hook latch that provides additional security.
When determining the dimensions of the lock you have It is essential to note the location of the screw holes. Certain mortise locks feature round screws while others use square screws. replacement upvc door locks 'll be able to determine where the keyway is located. Some have a vertical keyway and others are tilted at 45 degrees. It's a good idea to capture a picture of the existing lock with your digital camera before you remove it to ensure you get the correct replacement.
After you've gotten your measurements, it's now time to search for a new patio door lock. You can locate a wide selection of high-quality locks online and many of them are branded with advanced security features to protect your home. It is important to research locks and read reviews prior to you make a decision. Don't forget to regularly clean your locks to keep dirt and dust from interfering with the function of your doors.
Make sure you check the screw holes
Patio doors are an important element of your home's security. They should be checked for signs of wear to make sure they are operating properly. Over time, the locks and spindle that connects the handles on the exterior and interior will need to be replaced. A durable lock will not only stop unwanted entry but also improve security, energy efficiency, and safety.
There are several ways to narrow your search for a new lock, if you don't have the specific model. To begin, identify the type of keyway that is used. Aluminum patio doors are often fitted with rectangular cutout mortise lock as well as E2126 or E2079 locks are set in a recess within the frame. If you have an electronic camera, uploading a picture of the lock can aid in determining the type it is.
Another method of determining the type of lock you have is by observing the screw holes. The majority of sliding patio door locks have screw holes that align with the latch keeper that is mounted on the side jamb, but they may not be identical. For example there are screws that are larger than others and could have a different threaded end. Some screws also come with washers or a hex bolt attached to them which can affect the way they fit into the lock's hasp.
If you are aware of the type of lock your home has, you can start planning to replace it. You'll need to clean the lock first with a damp brush or cloth to remove any debris that could hinder its operation. After the lock has been cleaned and dry, you can apply a silicone-based grease to keep it in good shape and quiet.
In the future, it's a good idea to replace the old screws with more long ones. This will allow you get more grip and will allow you to install the lock more easily. After you've completed that it's a good idea test the handle and see how the latch hasp engages inside the lock.
If the hasp does not engage it is possible to put a washer or hex-nut behind it to help it catch more of the lip of the door. You can even put a shim on the side of the lock keeper on the jamb to see if it can help.
Check the Lock Snib
The snib acts as the lock mechanism located inside the door handle. You can turn on and off the snib to open or close your patio doors. It is the first thing you should check in the event that your locks aren't working properly. Also, you can check the keepers (located at the top and bottom of the door frame) for looseness or misalignment that could cause them to break. Make sure your snib is properly placed, and that the lock isn't snagged or blocked in any way.
The most commonly used patio door locks are made of steel mortise latches that hold your sliding glass doors. Incorporated into the door frame they are available in various styles and are a great security measure. Some are designed to hold keys, while some use an oval-shaped cutout for simple locking and unlocking.
Another option is a thumb-screw-style step-on lock that will securely hold your sliding doors in place without requiring you to turn the knob or turn the key. These locks are often found on older metal-framed patio doors, but can be a great choice for securing vinyl or wood-framed sliding doors too.
While you're examining your existing patio door lock, make note of the type and size of screw holes it uses to mount the escutcheon plate as well as the lock body. This will help you choose a lock that has the correct screw holes. It's also a good idea to examine your strike plate to ensure that it's secured properly.
If you own Jason Windows boltlock slider doors between 2000 and 2009, make sure the keeper screws remain in place and aren't loose or missing. These screws hold the snib partially open in "vent" mode, which allows airflow while promoting security. They are also important to avoid your lock being smashed. All locks must be inspected and cleaned regularly to keep corrosion, dust, dirt, or debris from obstructing their operation.
If your snib is broken it could be possible to replace the entire strike plate and snib unit. If your snib just needs to be aligned you can fix it by removing the strikeplate the help of a putty knife and then backing off the adjustment screws (located below and above the screw). Then, you'll need to move the strikeplate up or down until the engagement tongue lines up the Milgard logo.